Welche Arten von Produkten bieten Sie an?

Als Berufshersteller u. Großverkauf für fördernde u. Geschenkeinzelteile.

Die Palette unserer Produkte umfasst Anstecknadeln, Abzeichen, Manschettenknöpfe, Medaillen, Krawatten, Schlüsselbund, Militärmünzen, Stickereien, Lanyards und unsere erweiterten Produkte umfasst weiche PVC-Schlüsselanhänger, Magnete, Zinn Button Abzeichen, Flaschenöffner etc.

Welche Form kann mein Stift sein?

Jede Form, die Sie wollen. Wir kundenspezifisch anfertigen alle unsere Produkte von Grund auf, so können wir ihnen jede Form, jede Größe und jedes Design.

Was sind harte Schmelzstifte?

Hartemail Stifte sind langlebig und langlebig mit einem sehr hochwertigen Aussehen. Das Handwerk ist ein mehrstufiger Schmelzprozess, der zur Herstellung von Schmuck, Vasen und anderen dekorativen Gegenständen verwendet wird. Bei hartem Zahnschmelz wird der Zahnschmelz vor der Beschichtung hinzugefügt. Das Emaillepulver wird hinzugefügt und dann auf die gleiche Ebene wie die Metallstanzlinien flach poliert. Jede Farbe muss einzeln im Ofen gebacken werden, was den Prozess und die Kosten erhöht. Sobald alle Farben hinzugefügt wurden, kann das Abzeichen erneut galvanisiert und poliert werden, um das Abzeichen zu vervollständigen. Durch die zahlreichen Polierverfahren kann das Emblem etwas weniger detailliert werden als weiches Email und warum sich einige der Metallbänder in der Produktion ausbreiten und dicker als das ursprüngliche Design sind. Unser Hartemailprozess ist ein moderner Prozess des traditionellen Hartemailprozesses und der Hauptunterschied zwischen unseren Hartemails ist der eigentliche Schmelz.

Cloisonne Eigenschaften:

1. Kann 100 Jahre ohne Ausbleichen erhalten werden, da es aus Mineralerz gewonnen wird.

2. Wir verwenden hartes Emaillepulver, das aus Japan importiert, es ist Mineralpulver, also gibt es nur einige Mischungsfarbe aber keine Farbunterschiede.

3. Nach dem Brennen bei 850 Grad Celsius wird es eine harte und glatte Schmelzoberfläche haben, die gegen Verkratzen und Abfallen beständig ist.

4. Mit den Eigenschaften von hoher Qualität und Zeitbeständigkeit ist es die beste Wahl für Unternehmensstifte, Event-Pins, Konventionsstifte und Militärstifte.

 

Nur wenige Fabriken können Cloisonné-Produkte herstellen, und im Pearl River Delta ist JIAN der einzige, der es schafft. Wenn Sie daran interessiert sind, eine benutzerdefinierte harte Emaille Pin zu erstellen, kontaktieren Sie uns noch heute . Unsere Außendienstmitarbeiter können Ihnen bei der Entscheidung helfen, welcher Pin für Ihr Design am besten geeignet ist.

 

Origin of Pewter Pin Badges

Tin utensils and tin crafts are a kind of traditional products with a long history. Because of the noble, elegant, soft texture and bright brilliance they have always been cherished and collected by the upper and middle societies in China and the West, they are also a symbol of social status and wealth.

The pewter pin badges and tin "pilgrimage jars" found in the pyramids of the eighteenth dynasty of Egypt (1580-1350 BC) are the oldest known tin products in the world. In the Japanese courts, carefully brewed royal wines are served in tin utensils. British and German royalty also loved the use of tin vessels for beer. The Roman Empire was the earliest civilization to use tin ware on a large scale for domestic use.

The reason why tin utensils and tin crafts enjoy such a noble status comes from some excellent characteristics of tin metal itself. Tin is a softer metal with a lower melting point and strong plasticity. It can have a variety of surface treatment processes and can be made into a variety of products. There are traditional and elegant European-style wine sets, candlesticks, noble and elegant tea sets, as well as fascinating vases and exquisite eye-catching table decorations. The styles are all comparable to shiny silverware. With its elegant appearance and unique functions, tinware has been popular all over the world, and has become a daily product for people and a great gift for relatives and friends.

Process of tin products
1. Casting: Cast each product with a fine iron mold.
2. Manual Frustration: Rough edges are filed by hand.
3. Mechanical polishing: Use a machine to remove the surface of the product to achieve satin gloss.
4. Welding: The perfect welding interface must accurately judge the time and temperature.
5. Hand polishing: Carefully wipe the surface with special leaves to give a special gloss.
6. Quality inspection: Quality management personnel carefully check every detail of each finished product to ensure compliance with high quality standards.

Maintenance of tin products
1. Remember to store pure pewter pin badges in a clean and dry place.
2. Never use a dishwasher or brush to clean pure tin products.
3. Avoid pure tin fines coming into contact with flames or placed in heated areas.
4. Those who live near the sea must clean the tinware more frequently, because the large amount of salt in the air will make it tarnished.
5. Use warm water for cleaning. After cleaning, wipe with a soft dry cloth.
6. Wipe with a soft dry cloth and high-quality silver finish to make the surface as clean as new.
7. After the tinware is used for a long time, the color of the pattern will become dark. You can boil the lotus stem or lotus leaf with water, wipe and wash, and it will be descaled as new.
8. If the tinware oxidizes the spot for some reason, you can cut it in half with fresh tomatoes, rub the spot with the cut surface, and leave it to rest for a few minutes, then wash it with water, and the rust spot can be removed.

Types of tin products
There are about 200 kinds of tableware, wine, tea, sacrifice, stationery, smoking, coffee, beer, vases, trophies and decorations. The shape is pretty, the processing is exquisite, the decoration is beautiful, the carving method is exquisite, the knife is like a pen, and the product is bright.

Advantages of Soft PVC Products

Soft PVC technology is closely related to our lives, and many products in our lives are inseparable from this technology.
Soft PVC products have strong weather resistance and are not easy to fade, so soft PVC products can provide different color options according to needs, and can even provide transparent and bright colors. Soft PVC technology manufacturers can provide various soft PVC products, such as bottle openers, winding machines, clips, PVC clips, coasters, key chains, key chains, PVC labels, lapels, luggage tags, PVC magnets, PVC medals , Memory card readers, mobile phone holders, PVC pens, photo frames, USB flash memory frames, wrist straps, etc. Because the products manufactured by the soft PVC technology are stable, these products are more durable.
PVC materials with special requirements generally need to be imported from abroad. The more well-known foreign countries are the United Carbonization Company and the Nordic Chemical Company. With the continuous research and development and technological accumulation of major research institutes and production units in China, domestic PVC has been changed. The formula design and manufacture of sexual materials have reached the international advanced level, and have completely replaced imported materials from abroad, and many products have been exported abroad.DONGGUAN JIAN PLASTIC & METAL PRODUCTS LTD is an enterprise with mature soft PVC technology. It has very good development prospects and can provide customers with high-quality soft PVC products.

custom metal badges of Jian are popular around the word

Jian has been a professional manufacturer of customized metal, embroidery and soft PVC logos in Taiwan for more than 35 years and many of its products are conservatively praised worldwide. The custom metal badges can be said to be a more prominent product.
Jian has cooperated with many famous companies or events with its excellent custom processing technology of custom metal badges. These companies include Disney, Wal-Mart, McDonalds, etc., and sports events include NBA, NFL, NHL, FIFA, Super Bowl, etc. It can be said that it has been widely recognized.
Taking sports events as an example, the metal medals or metal badges it produces are of very good quality, and the workmanship is very fine, and the fine processing technology is very good. The badge pattern produced is very beautiful and vivid, and it is not easy to damage. It can be stored for a long time and is very commemorative.Therefore, Jian has attracted many customers by virtue of the quality of its products and excellent service, and it has also been loved worldwide.

What are the material of the table mat? What material is good for the table mat

What are the table mat materials? What material is good for the table mat? The table mat is mainly used to protect the table. If you encounter something very hot, the table mat can protect the table top. However, there are many kinds of table mat materials, and the effect of using different table mat materials is different.
table mat

Table mat material:
1. Silicone table mat. Silicone table mats are relatively common, mainly used as table mats for tea cups. This kind of silicone table mats can be designed with different patterns, and there are many choices in the color of the silicone table mats, and they can guarantee that they will never fade. However, if the silicone table mat comes into contact with something that is too hot, it will easily turn black, and it will not be easy to clean up after a long time of use, and it will easily turn black.
2. Cotton table mat. This cotton table mat is very absorbent and can be used as a table mat for tableware. The table mat can accept high temperatures and can control the temperature to avoid being burned. Cotton table mats are easier to clean up after use. The material of cotton table mats is very soft and the use effect is very comfortable. However, the material of the table mat is relatively fragile, and there will be more stains after a long time, and it will not be easy to clean up, and there will be bacterial residues.
3. Bamboo table mat. Bamboo table mats can be found in many restaurants, especially those that make clay pots. The bamboo table mat has good heat insulation and can prevent scalding and damage to the dining table during use. Bamboo table mats can also be made into different shapes, which have high practicability and high ornamental value. Bamboo table mats can prolong the service life and avoid insects. The most important thing is that the price is also very affordable.
4. Hemp table mat. Hemp table mat is a table mat made of hemp as a material. This kind of table mat has a long service life and is very durable. Hemp table mat is a very strong table mat. When the hemp table mat is used, it has a good insect-proof effect, and it is also very convenient to clean up after using the hemp table mat.
5. Plastic table mat. Plastic table mats are also very common nowadays. The quality of plastic table mats is very light, and there are many styles. It is a relatively environmentally friendly table mat, and plastic table mats can be printed with many patterns and colors. Kind of, similar to silicone table mats, knowledge plastic table mats are harder.
6. Paper cloth table mat. Paper cloth table mats are generally not washable with water, so they are generally used as disposable table mats. Paper cloth table mats are also the latest type of table mats, all made of environmentally friendly materials.

What is tinplate? Can it be used as a PVC USB Flash Disk Drive box?

Tinplate is an iron sheet wrapped in tin. Because of the stability of tin, tinplate can be used in a variety of packaging. Because of its metal texture, fashion, safety and convenience, more and more people choose tinplate packaging. Tin has stable chemical properties and is not easily corroded, so tinplate can be tinned. In this way, it can be ensured that some products in the package will not be affected and can be stored well.

PVC USB Flash Disk Drive box 3
Tinplate cans are widely used as packaging, and can be used as PVC USB Flash Disk Drive boxes, candy boxes, pencil boxes, skin care products boxes, cosmetic boxes, etc.

Wie man bestellt ?

Import von China, kann es nicht einfacher sein, selbst Sie sind nicht eine Firma und haben keine Importlizenz, können wir die Waren an Ihre Hände durch FedEx / DHL / UPS oder durch Luft liefern.


Es ist so einfach wie folgende Schritte:
ein). Sagen Sie uns, welche Artikel Sie interessiert sind oder was Sie uns für Sie durch E-Mail / Call / Fax zu tun brauchen;
B). Wir schicken Ihnen unser Angebot nach Ihren Wünschen;
C). Wir schicken Ihnen eine Probe für die Prüfung, nachdem wir den Preis bestätigt haben;
Normalerweise müssen Sie die Beispielgebühr zahlen, aber es kann zurückerstattet werden, wenn Sie den Auftrag bestätigen.
D). Wir beginnen die Massenproduktion nach Erhalt Ihrer Bestätigung für die Probe;
E). Wir versenden die Waren zu Ihnen, sobald die Waren bereit sind.

Was ist die Mindestbestellmenge (MOQ)?

Im Allgemeinen ist unser MOQ 300 PCS pro Element. Aber wie wir verstehen, dass unsere Klienten Testmarktreaktion testen möchten, bevor sie Volumen-Auftrag vergeben, werden wir betrachten, um zu nehmen sogar Ihr erster Auftrag ist kleiner als 300pcs.

Ich habe ein Design, wie kann ich es Ihnen schicken?

Sie können uns eine E-Mail, Fax uns eine Kopie oder mailen Sie uns ein Bild. Wir akzeptieren alle Arten von Dateiformaten; Einschließlich ai, eps, jpg, pdf und andere.

Was unterscheidet zwischen Siebdruck und Offsetdruck?

Es ist eine andere Drucktechnik und unterscheidet sich hauptsächlich in der Farbdarstellung. Siebdruck wird oft für einfaches Design mit weniger und soliden Farben verwendet, während Offsetdruck für komplexe Kunstwerke und Klangfarben geeignet ist. ZB: eher wie ein Fotoeffekt suchen.

Warum kann nicht aus rostfreiem Stahl gefertigt werden?

Edelstahl hat eine Beschichtung auf sie zu verhindern, rostig, daher keine Beschichtung erforderlich ist. Wir machen in der Regel plating auf Produkte, die aus Bronze, Kupfer, Eisen, Zink-Legierung und Zinn.

Was ist CMYK im Offsetdruck?

CMYK jeder Buchstabe stellt die Farbe dar, die im Offsetdruck verwendet wird - Cyan, Magenta, Gelb, Schwarz.

Warum benötigt Stanzen Metallgrenzen?

Ist der Stanzprozess notwendig?

Warum können wir nicht Edelstahl zum Stanzen verwenden?

Edelstahl sowie Eisen sind Materialien mit hoher Dichte.

Stanzen auf Materialien mit hoher Dichte, wird die Form leicht beschädigt werden und führen zu einer hohen Ausfallrate Produkt, daher ist es nicht empfehlenswert.

Was sind die Unterschiede zwischen Synthetic, Soft und Hard Enamel?

Die Hauptunterschiede zwischen diesen drei Farbstoffen sind Produktionsverfahren und Farbwiedergabe.
Synthetische Emaille ist wahrscheinlich das beste Material, um hell und glänzend für Farben in einem vernünftigen Preis. Die Farben werden gleichmäßig auf die Metallplatten und gleichmäßig flach auf die Produktoberfläche gelegt.

Hartlack unterscheiden sich von weichem und synthetischem Email. Es ist natürliche mineralische Substanz und geschmolzen während des Heizprozesses. Es ist nicht so hell und glänzend wie Soft und Synthetic Enamel, aber die Farbe dauert hundert Jahre ohne Zerstörung mit Absicht.

Soft-Emaille, im Allgemeinen ist es billiger im Vergleich zu synthetischen und harten Emaille. Es hat eine ähnliche Farbe zu Synthetic Enamel, sondern Farbzonen Aussparung und niedriger als Metall-Grenzen. Metallgitter sind einfach zu definieren.

Precautions for Printed Acrylic Stand in the screen printing process

1. The printing film can not be replaced by laser print draft or sulfuric acid paper draft. It must be a positive or negative positive film output by a professional manufacturer. Each time you output, you must output one more blank film with positioning crosshairs. When printing, first fix the blank cross-hair film on the glass plate with transparent tape, and other color films should be based on this, so that the position of the screen can be kept consistent.
2. For fine screen production, high-resolution imported photosensitive glue and high-tension and low-stretching imported screen must be selected.
3. The printing ink should use high-gloss, friction-resistant organic glass ink, especially matte ink when printing on the surface, because this ink is not resistant to friction and the color is not gorgeous.
4. Screen printing color matching is generally carried out based on the experience of the screen printing master. Because the number of screen meshes used in each batch of orders is different, the thickness of the photosensitive film is also different, which often causes the color cast of the printed product, "the ink color in the barrel" No, I will see the true face after scraping on the page" which explains this truth. Therefore, each batch of orders must be printed out with the printed screen for trial printing, and the customer can confirm that the color is consistent with the original before entering the formal printing.
5. Large-format paintings must be printed with a screen printing machine, and small-format paintings can be printed with suction pads. During the printing process, six consistency should be maintained: 
①The screen spacing of multi-color screens should be consistent; 
②The printing speed should be the same; 
③The printing pressure should be the same; 
④ Keep the ink consistency consistent;
⑤The hardness of the large and small scrapers is the same when printing by hand;
⑥ Maintain the same temperature and humidity in the printing workshop.

There is often a lot of static electricity and dust on the surface of the Printed Acrylic Stand. If the dust adheres to the screen, it will cause the text and color blocks to be incomplete and waste products. Therefore, printing must be carried out in a clean and dust-free room. The surface dust can be removed in two steps. First, wipe off the surface dust with a damp cotton cloth, and then use an electrostatic dust removal brush or dust removal roller to remove the remaining dust. When printing, check while printing. If any problems are found, clean the screen in time before printing.

Was ist Ihre Produktionsvorlaufzeit?

100% feine organische gekämmte Jersey Baumwolle für mehr Tragekomfort. Anschmiegsamer, modischer Schnitt, der sich praktisch an jede Figur anpasst. Hergestellt in den USA von American Apparel. Weiches PVC bietet erstaunliche kleine Detailwiedergabe mit den addierten Vorteilen des Seins leicht, langlebiges Gut, flexibel und perfekt für das Zeigen Ihres Firmenzeichens in jeder Einstellung.

Technische Daten:
● Material: Umweltfreundliches Weich-PVC
● Design: PVC-Medaillen können 2D oder 3D-Effekt sein
● Halsband: Erhältlich mit Polyester, Nylon, Wärmeübertragung, Schlauch oder gewebtem Muster
● Nutzung: Für Sportarten

Welche Art von Zahlung akzeptieren Sie?

Gegenwärtig nehmen wir die Zahlung durch T / T und durch Kreditkarte für den kleinen Betrag an.

Wir sind nicht bestrebt, einmalige Geschäfte zu machen. Wir werden eine starke und langfristige Beziehung mit allen unseren Kunden aufbauen. Unser Erfolg basiert auf Kundenzufriedenheit. Ferner hat jeder Auftrag eine SOP (Standard Operation Procedure), um zu folgen. Die Produktion wird nur fortgesetzt, nachdem alle Details bestätigt wurden. Wir tun 100% kontrolliert vor Versand und nehmen Verantwortung für Rückstellung geht über Annahme hinaus.

Welche Garantie haben wir seit Vorauszahlung?

Wir sind nicht bestrebt, einmalige Geschäfte zu machen. Wir werden eine starke und langfristige Beziehung mit allen unseren Kunden aufbauen. Unser Erfolg basiert auf Kundenzufriedenheit. Ferner hat jeder Auftrag eine SOP (Standard Operation Procedure), um zu folgen. Die Produktion wird nur fortgesetzt, nachdem alle Details bestätigt wurden. Wir tun 100% kontrolliert vor Versand und nehmen Verantwortung für Rückstellung geht über Annahme hinaus.